Accueil > mz-12 PRO HoTT (Ready for aerofly)

mz-12 PRO HoTT (Ready for aerofly)

#3031201 mz-12 PRO HoTT (Ready for aeroflyRC)

En savoir plus

279,90 €

inkl. MwSt (19%)

mz-12 PRO HoTT (Ready for aeroflyRC)

- ready programmed  -

This offer is for all who are looking for a ready set up and programmed RC radio.
You`ll get a completely setted up RC radio "Ready for aeroflyRC".
For this article you need your own HoTT receicer Gr-12 or Gr16 and an IKARUS USB-Interface. 

If you dont have an own HoTT receiver and an IKARUS interface,
then you can also find the radio in a set with Gr-12 receiver and  interface as #3031200 here in the KARUS shop.

Set content

  • An original mz-12 PRO HoTT incl. 1500 mAh Lipo battery!
  • Charger cable and radio manual
  • Instructions for setting up the radio in aeroflyRC
 

Order infos!
Please name at the order form your control mode.
You can select throttle on the right (mode 1 or 3) or throttle on the left (mode 2 or 4).

 
The presettings

The transmitter is ready-to-use with a model memory "aeroflyRC
The transmitter is set up for you individually on Mode1 (throttle on the right) or Mode2 (throttle left) (mechanically and in the transmitter menu)
The transmitter is  programmed with 4 channels for throttle, rudder, aileron and elevator 
2 switches for 2 special functions are ready programmed  (e.g. landing gear and flaps).

After receiving the set you only need to connect your own IKARUS interface to a free USB input on your PC or Mac.
start the aeroflyRC and search for a "New controllert" via the main menu. Then just follow the instructions of the easySetup for transmitter calibration.

You do not need an extra charger for this transmitter!
You can charge the transmitter with the enclosed USB charging cable to a 4.2 V / 500 mA USB plug-in charger.

If you dont have an own HoTT receiver and an IKARUS interface,
then you can also find the radio in a set with Gr-12 receiver and  interface as #3031200 here in the KARUS shop.